Translate

Our Products

Login Form






Lost Password?
No account yet? Register

Register with our website to receive special information on our products and promotions.
  EDGE™ Products Overview arrow Detachable Saddlebag Brackets arrow Honda arrow Honda VTX Models arrow VTX 1800 F (2002 - Present)
VTX 1800 F (2002 - Present) PDF Print E-mail
Edge Brackets Quick Release Detachable saddlebag system

Edge Brackets system allows you put on or take off your saddlebags in roughly two seconds!

The Edge Brackets system is easy to install and once installed no tools are needed to remove your saddlebags. Edge Brackets are installed by removing the two bolts from your fenders and replacing the two OEM bolts with the Ghost Bracket bolts and hardware which are called "keepers". The Edge Brackets are then bolted on to your saddlebag and simply slide right on to the keepers.

Now with the latest Generation III (G3) Edge Brackets you will have the most versatile saddlebag system ever developed. Made from solid 10 gauge steel, the brackets are specialty pretreated and then black powder coated for durability and good looks. All the hardware provided is stainless steel that is polished to a show room finish. The Generation III Edge Brackets are completely adjustable in every direction allowing you to place your bags on the bike exactly where you need them not only getting you the exact look you desire, but also helping to avoid many undesirable turn signal relocation requirements. Simply slide the bracket on the stainless steel keepers, turn your locking key and the brackets and your expensive saddlebags are safe, securely locked onto your bike. Why settle for just one set of saddlebags? With Edge Brackets your saddlebags are interchangeable allowing for multiple sets of saddlebags to be used.

Edge Brackets Quick Release Detachable saddlebag system

Edge Brackets Quick Release Detachable saddlebag system

Edge Brackets G3 Model 105
Edge Brackets ST-104
Fits fender bolt width 4 1/2" - 7 5/8"
Large Image

Edge Brackets G3 Model 106
Edge Brackets UK-104
Fits fender bolt width 4 1/2" - 10 3/8"
Large Image


Fitments


Please select the fitment below that best describes your motorcycle configuration.

Part Number GB-H-VTXC-105 (For smaller to medium size bags on bikes with no backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where no backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXC-106 (For medium to large size bags on bikes with no backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where no backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCBK-105 (For smaller to medium size bags on bikes with standard aftermarket backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where standard aftermarket backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCBK-106 (For medium to large size bags on bikes with standard aftermarket backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where standard aftermarket backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCDLBK-105 (For smaller to medium size bags on bikes with Hondaline Deluxe backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Deluxe backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCDLBK-106 (For medium to large size bags on bikes with Hondaline Deluxe backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Deluxe backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCTBK-105 (For smaller to medium size bags on bikes with Hondaline Traditional backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Traditional backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCTBK-106 (For medium to large size bags on bikes with Hondaline Traditional backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Traditional backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCSBK-105 (For smaller to medium size bags on bikes with Hondaline Sport backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Sport backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCSBK-106 (For medium to large size bags on bikes with Hondaline Sport backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the front two existing mounting bolts of the fender rail.
  • For use on models where Hondaline Sport backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCPBK-105 (For smaller to medium size bags on bikes with Paladin detachable backrest installed)
Fitment Details
  • Recommended for small, medium or slanted saddlebags up to 22" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where Paladin detachable backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-H-VTXCPBK-106 (For medium to large size bags on bikes with Paladin detachable backrest installed)
Fitment Details
  • Recommended for medium or large saddlebags over 20" in length.
  • For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat)
  • For molded aftermarket or OEM saddlebags such as Harley Heritage saddlebags please also purchase the GB1-SK-OEM-BAG kit.
  • Installation is done on the rear two existing mounting bolts of the fender rail.
  • For use on models where Paladin detachable backrest is installed.
  • No turn signal relocation required.
Price$154.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Backrest Kits


Edge Brackets backrest kits allow for integration of your Edge Brackets and the new backrest (sissy bar) and are used when the backrest is purchased after Edge Brackets have already been installed on the bike.

Part NumberGB-BK-H-VTXC
Fitment Details
  • For use with standard OEM or aftermarket backrests
Price$19.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part NumberGB-BK-H-VTXCDL
Fitment Details
  • For use with Hondaline Deluxe backrests
Price$31.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part Number GB-BK-H-VTXCP
Fitment Details
  • For use with Paladin detachable backrests
Price$24.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Accessories

Part NumberGB-CE-101
Fitment Details
  • A voluble accessory for every Edge Brackets owner. This carrying handle sports a convenient leather strap and specially designed polished stainless steel slotted keepers that slide into the Edge Brackets mounting slots. The Carry EEZ allows you to conveniently carry both your saddlebags when you want to remove them from your motorcycle. No fumbling when trying to carry both your saddlebags at once, just slip both your bags onto the keepers and you now have one hand free to open doors, search your pockets, or wave at friends. Be the envy of your riding group with a Quick Release Detachable setup and the Carry EEZ Leather carrying handle.
Price$36.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Part NumberGB1-SK-OEM-BAG
Fitment Details
  • Specialty bolt and spacer kit used for mounting molded aftermarket and/or OEM saddlebags where the back of the saddlebag is not flat.
Price$36.95
Buy Now Carry EEZ carrying handle for Edge Brackets

Images


Image
Edge Brackets on a VTX C with Saddlebags Off
Image
Edge Brackets on a VTX C with Saddlebags On
Image
Edge Brackets on a VTX with Hondaline Deluxe Backrest and Saddlebags Off
Image
Edge Brackets on a VTX with Standard Aftermarket Backrest and Saddlebags Off
Image
Edge Brackets with Harley Haritage Saddlebags
Image
Edge Brackets with Harley Molded Saddlebags
 
Copyright © 2008 CAO Distributing, Inc.
Powered By: Galaxy IT Corp