Translate

Our Products

Login Form






Lost Password?
No account yet? Register

Register with our website to receive special information on our products and promotions.
  EDGE™ Products Overview
EDGE™ Brackets on Harley Davidson Softail (No Backrest) with EDGE™ Saddlebags PDF Print E-mail


In this image demo, we used a 2003 Harley Davidson Fat Boy with EDGE™ Saddlebags (p/n GB-SBR-107-S) and a set of our GB-HD-ST-105 EDGE™ Brackets. As you will see, the installation is quite simple and should take you no more than 20 minutes from start to finish for both the left and right sides of the bike.


Step 1

Step 2
Image
Start on right side of the bike
Image
Remove the rear fender bolt
 Step 3 Step 4
Image
Replace the rear fender bolt with EB bolt and keeper
Image
Secure the new rear fender bolt and keeper
 Step 5 Step 6
Image
Repeat steps 3 and 4 to replace the front fender bolt with EB bolt and keeper
Image
Take the right Edge Bracket
 Step 7 Step 8
Image
Place the Edge Bracket on to the slotted keepers
Image
Make sure the bracket sits in the desired position on the keepers
Step 9  Step 10
Image
While bracket is in place tighten the nylocks securing the sliders in place
Image
Hold the bag up to the bracket and trace the location of the bracket with a marker
 Step 11 Step 12
Image
Drill the holes in the bag at the location of mounting holes on the bracket
Image
Secure the bracket to the bag using the provided black bolts
 
 Step 13 Step 14
Image
Tighten the provided nylocks to the black bolts from the inside of the bag
Image
Your right bag is ready to go on the bike
 
 Step 15Step 16 
Image
Slide the Bag - Bracket assembly on to the installed slotted keepers
Image
Turn the key and the bag is secured on your bike
 
Step 17  Step 18
Image
Repeat the above steps for the left side of the bike
Image
Congrats, you are done!!!
 
Copyright © 2008 CAO Distributing, Inc.
Powered By: Galaxy IT Corp
Try SEO PowerSuite