Translate

Our Products

Login Form






Lost Password?
No account yet? Register

Register with our website to receive special information on our products and promotions.
  EDGE™ Products Overview arrow Installation Demos arrow EDGE™ Brackets On Harley Davidson Heritage Softail with OEM Saddlebags
EDGE™ Brackets On Harley Davidson Heritage Softail with OEM Saddlebags PDF Print E-mail


EDGE™ Brackets are really simple to install onto your motorcycle, even with molded OEM saddlebags like the Heritage bags from Harley Davidson. This image demo will give you a great idea of how the brackets get attached to an uneven surface on saddlebags like these. In this case, we used a 1998 Harley Davidson Heritage Softail with OEM Heritage Saddlebags and a set of our GB-HD-UKHBK-106 EDGE™ Brackets.


Step 1

Step 2
Image
Remove the OEM saddlebags from the bike
Image
Drill out the rivets on the OEM bracket
 Step 3 Step 4
Image
Remove the bracket
Image
Using the OEM mounting holes insert the 1.5” bolts, washers and spacers provided with our kit
 Step 5 Step 6
Image
Place the bracket on the bolts and hand thread the nylocks. Do not tighten with a ranch yet!
Image
Drill the 3rd hole in the bag and use the shorter 1” bolt to secure it by hand only at this time
 Step 7 Step 8
Image
Drill the last, 4th hole
Image
Insert the spacer between the bag and the bracket
Step 9  Step 10
Image
Use the 1.5” black bolt to attach the assembly
Image
Now secure all four bolts with a ranch
 Step 11 Step 12
Image
Repeat the above steps for the other side
Image
You are ready to hang your bags
 
 Step 13 Step 14
Image
Top view with bags installed
Image
Rear view with bags installed
 
 Step 15
Image
Looks nice!!!

 
Copyright © 2008 CAO Distributing, Inc.
Powered By: Galaxy IT Corp
Try SEO PowerSuite